-
הודעות פעילות
561 -
הצטרפות
-
ביקר לאחרונה
מוניטין
0 Neutralאודות gadito
-
דרגה
Advanced Member
-
unipaas 1.9 n על שרת 2012 R2 לא מצליח לעלות בפיתוח
gadito replied to gadito's topic in Magic xpa, uniPaaS & eDeveloper
תודה רבה !!! -
unipaas 1.9 n על שרת 2012 R2 לא מצליח לעלות בפיתוח
gadito replied to gadito's topic in Magic xpa, uniPaaS & eDeveloper
נראה לי בעיית הרשאה , אבל לא ברור מה בדיוק.. -
unipaas 1.9 n על שרת 2012 R2 לא מצליח לעלות בפיתוח
gadito replied to gadito's topic in Magic xpa, uniPaaS & eDeveloper
-
unipaas 1.9 n על שרת 2012 R2 לא מצליח לעלות בפיתוח
gadito replied to gadito's topic in Magic xpa, uniPaaS & eDeveloper
-
unipaas 1.9 n על שרת 2012 R2 לא מצליח לעלות בפיתוח
gadito replied to gadito's topic in Magic xpa, uniPaaS & eDeveloper
mg.bmpכעת יש לי בעיה חדשה .... mg.bmp -
unipaas 1.9 n על שרת 2012 R2 לא מצליח לעלות בפיתוח
gadito replied to gadito's topic in Magic xpa, uniPaaS & eDeveloper
עובד ! זאת באמת הייתה הבעיה . תודה רבה -
unipaas 1.9 n על שרת 2012 R2 לא מצליח לעלות בפיתוח
gadito replied to gadito's topic in Magic xpa, uniPaaS & eDeveloper
זה שרת 2012 ... קיים. -
unipaas 1.9 n על שרת 2012 R2 לא מצליח לעלות בפיתוח
gadito replied to gadito's topic in Magic xpa, uniPaaS & eDeveloper
ביצעתי את השינוי וזה עדיין לא עובד , ( בפיתוח מעיף שגיאה ובRT עובד ...) מדובר על התקנה חדשה של המערכת ...על שרת חדש .. יש רעיונות נוספים ?? גדי -
unipaas 1.9 n על שרת 2012 R2 לא מצליח לעלות בפיתוח
gadito replied to gadito's topic in Magic xpa, uniPaaS & eDeveloper
אתה צודק...טוב להזכר... גדי -
unipaas 1.9 n על שרת 2012 R2 לא מצליח לעלות בפיתוח
gadito replied to gadito's topic in Magic xpa, uniPaaS & eDeveloper
-
unipaas 1.9 n על שרת 2012 R2 לא מצליח לעלות בפיתוח
gadito הוסיף את האשכול Magic xpa, uniPaaS & eDeveloper
הי , אני מנסה להתקין את המערכת על שרת חדש 2012 R2 , ומעיף לי שגיאה בעליה של מיקרוסופט... זה קורה רק בפיתוח , בזמן ריצה עולה .. האם למישהו יש רעיון מדוע ? גדי -
?האם יצא למישהו להשתמש במנגנון של הרשיונות הצפים בשרתי אינטרנט יש לי מערכת מפוצלת לצורך שרידות , הבעיה שחלוקת הרשיונות בינהם מורידה מהתפוקה הכללית , הפתרון הבא נראה סבבה אבל אני מעט חושש להפעילו האם למישהו נסיון בנושא Floating License Support uniPaaS's default behavior is that you have to define the number of licenses that each server uses during the execution of project. This number is checked across all the servers in multi-project environment to ensure that it is within the license limitation. For example, if you have license with 20 threads, and you have two projects running in multi-project environment, you have to distribute the threads in advance. Project might receive 15 threads, while Project receives 5. In multi-project environment, each server runs different project. This means that the capacity of each server (project) is key issue, and the ability to share licenses (threads/users) is very important. uniPaaS's floating license mechanism lets you make optimum use of these licenses in multi-project environment, by sharing licenses between servers. Therefore, when particular project is idle, other projects can utilize its licenses. Because the uniPaaS broker controls the servers and their capacity, it needs to know the total number of licenses that are available for its servers. The broker adds up the total Max no. of threads and Max no. of users belonging to each server, except for servers whose Max no. of threads or Max no. of users are defined as -1 (see 2, below), which are defined by your license. The broker uses this figure as the total number of available threads/users. If the broker sees that particular server is not using its allocated number of threads/users, they can be used by other servers. To use this functionality, follow these steps: Define one server with Maximum Number of Concurrent Requests >= 0 or Maximum Number of Concurrent Users >= 0 (for RIA). This setting is required since at least one of the servers has to check out number of licenses. value of 0 means that the engine will check out all of the threads/users that are defined in the license. In all other servers, set the Maximum Number of Concurrent Requests or Maximum Number of Concurrent Users (for RIA) to -1. This means that they will share the license with the engine() that already checked out number of threads. In the mgrb.ini file, set the FloatingLicense flag to . The Floating License support for RIA is since version: uniPaaS 1.9e
-
מיון נתונים של מקור נתונים ראשי ללא גישה נוספת לבסיס הנתונים בRIA
gadito replied to racheliv's topic in Magic xpa, uniPaaS & eDeveloper
תגדירי שדה מקומי ובנוסחה הצבה את הערך של השדה מבסיס הנתונים מיון על השדה המקומי ירוץ בקליינט גדי -
תקלת הרצה של יוניפס 1.9 - " לא ניתן להכין את מנוע הריצה לשם הרצת הפרוייקט "
gadito replied to gadito's topic in Magic xpa, uniPaaS & eDeveloper
לא פתר את הבעיה ... תודה בכל מקרה .. -
הי , יש לי תקלה מוזרה בהרצה של (פיתוח) יוניפס בחלק מהמחשבים אצלנו בארגון. בעליית התוכנה מופיעה השגיאה הבאה והמערכת נסגרת. לא ניתן להכין את מנוע הריצה לשם הרצת הפרוייקט, בעיה זאת יכולה לנבוע מהתקנה לא מסודרת או ממחסור במשאבי מערכת יש להפעיל מחדש את הסטודיו או להתקין מחדש את המערכת .... למישהו רעיון ?